Feller Bunchers
DP826092004 TK 741, s/n20200187, HF201 full Tilt
head, 1.25 front window Artic heater, Flexxaire
fan, Diesel, 4964hrs. 28ft. 2in. max reach, new
track chain, new seat. $120,00
A610102005 Timbco 425 EXL, 5747hrs., Cummins
260hp. Good Undercarriage at 75%. Roto
Saw H1922B s/n Ch01258, Pro-heat, reversing
fan, fire suppression, extra Hydr cooler, vaccume
pump, floor heater, manual leveling. In Mich.
$165,000
PG618101999 Timbco with 22in. Quadco Hot Saw,
the machine is in good shap. Cummins
engine and the cab has the leveling system.
In Ky. USA $130,000
FB55101995 Timbco 445 B Feller Buncher, this
machine has a Timbco Bar saw with 40
degree rotation, cummins 260hp, Cat
Extended undercarriage 51 link at 80%.
Link prat number 6Y2589/90.9. Roller
frame part number 179-1497. Hours on
meter 8685. $59,000
Has built brush Grapple with
cyclinder and mounting links attachments
are extra. $5,000 In Montana
F722102002 Timberjack 608 , 6000hrs. 22in. Hot saw,
70% Undercarriage, Cummins engine, Fire
Suppression, 30in track pads. In Mass. $96,800
K315101993 Timbco Feller Buncher s/n 188-0115
Runs great, 400hrs on rebuilt pumps, cutting
head, re-bearing, new teeth, Undercarriage at
75% or better. In Ohio $76,500
M710091993? Timbco 425 Saw head, Cummins powerd.
new drive motors, In Mich. $62,000
Z-911081993 Timbco 425 with Timbco Saw Head.
5.9 Cummins, 8506hrs. $81,500
K1-912071993 Timbco Feller Buncher s/n 188-0115.
runs great, 400hrs on reuilt Pumps, Cutting
Head, rebearing, new teeth. Undercarriage
75% or better. $75,000
M71009John Deere 490 D 18in Fabtek Saw head
and dirt bucket. In Mich. $31,000
RM121308Cat 227 1988-89 Roto-saw, clean inside and
out. Near new undercarriage. $28,500
S102091995 John Deere 643D Feller buncher with Hot Saw
New tires, new chans, new Hydr. pump, new pilot
pump, heat, air. Runs good, nice machine. $39,500
G-98084500 Franklin 1996 model. Timbco Bar Saw
with Quick coupler 2512hrs. 24.5x32 tires.
You can not find a better machine for this
age and money. $58,500
D716081993 Franklin 3000, 3064hrs. Omni Saw
Head. $17,900 Sale or Trade
Project? 170 Franklin, Feller buncher, 28L tires
Detriot engine, needs rebuilding. $5,500
TM-3051990 Franklin 5001-20 Shear, 34x6700
tires, 6BT Cummins. Hydro-stat. $27,500
C513102002 Hydro-Ax 411 EX Feller Buncher, 18in
High speed saw, 6 cyl. Cummins heat and air,
28L rubber tires at 60%, excellent shape,
9950hrs. In ILL. $57,500
WR2-52081989 411 Hydro-Ax with 16in. Shear Head,
John Deere powered engine. Good
rubber. $20,500
CR12310Hydro-Ax 411 model, with Deep pocket
16in. Shear head, 4in Shear cylinders,
23.1x26 tires. In Wisc. $10,900
CR61810Hydro- Ax 411 B with deep pocket Shear
head. In Wisc. $9,500
CG11709(Not actual photo)
1987 Hydro-Ax 311 B, newer John Deere
engine, Timbco saw head and Shear head.
In Minn. $26,500
DR-830081992 Hydro-Ax 221, John Deere 4-cyl. engine.
Timbco Bar Saw, chains included. Good running
condition. $17,500
ES-104Timbco Prototype, New D6 undercarriage
Mack Engine with Side Tilt on Cab only.
2- Shear Heads. $27,500
D-100408
Forestry Flail Mower, approx. 6ft wide about 5ft width? built very sturdy. Not sureof MFG.
Includes PTO shaft and a few extra teeth, bushing in tool box, Needs at least 40 plus horse power can handle 80-100. Metal flaps at bottom that appear torn are just shrapnet
deflectors. $3,900 OBO.
C71710Koehring 18 in. Hot Saw
with near new disc. In Wisc.
$5,900
B82092-new Omni ? Frames. No cylinders.
$500 each.
RMS41810420 Timbco Rollers, complete set from a burnt
machine, near new. Part# 3591 Cat , In Wisc.
$100 each.
RMS43010Burnt 420 Timbco, s/n unknown, good booms,
new track rollers, good track drive motors, swing
motor looks good? 6-cylinder John Deere engine
looks good for rebuild. Main lift and stick boom
cylinder look good. Trade or Sale.
