Harvester and Processors 1
New Heads Now available.
PD713102006 Valmet 415 EX with 360 Valmet Harvester
head, 6277hrs. Sisu Diesel engine, Single shift
machine, starts and runs well. HD D5 Single
Grouse Undercarriage. In Canada $150,000.
US. funds
PG619102-2008 Linkbelt 135 Carriers with Log Max
5000 Harvesting Heads, both have 3300hrs-
3,800hrs on them. Both are in excellent condition,
and have been well maintained. In Ky. USA
$225,000 for each or OBO.
S112809
2007 Case CX135 SR model, 250hrs, 100hrs.on Kelsa 25RH Processor Head 26in capacity, 88hp Isusu engine. 62gpm. Hydr flow, 25.800 Draw bar pull In Wisc. Will consider 6-wheeler Forwarder or Wooded property on trade. Dirt Bucket included.
$198,500
PG1029092004 Tigercat 822 with Log Max 7000 Top
Saw, steel feed rollers, total of 800hrs. In
Mississippi, $369,000
B124092005 Tiger Cat TK 711 5800hrs. Log Max 750 Head with Top saw. Log Mate 400 computer.
New Undercarriage C6-195hp. engine, In Maine. $154,900
PD-72708New Neuson 24 MHT, 6-cyl. Turbo diesel
engine John Deere 230hp. Hydr. pump,
two separate circuits pump basic machine.
Negative control, 2x152 1/min. pump aggregate,
P/Q control, 380 1/min. Dimensions. Net weight
23500 10ft wide.$225,000
Z715102006 Timber-Pro 830 Combo Machine with
5450 hrs. Cummings 300hp engine with
Pro-heat. Kesla RH 30 Harvester head with
Super grip bucket, 33ft Extenda-boom, tires
750/55-26.5 with tracks all the way around.
In Wisc. $230,000
O427092005 Timber Pro approx 6800hrs. Rolly head.
300hp.Cummins, Tracks, Pro heat. Will
consider trades. In Wisc. $262,000
J1-1228072004 Timber-Pro TB620E with 2004 Logmax
7000 Processor Head, 300hp Cummins
Diesel engine rebuilt by Cummins.
Extend-a-boom with 33ft. reach. Hultdin's Eco
Tracks on Front bogies. Double Diamond
studded chains on rear. A/c, New Hyd. pumps,
rotory manifold. Lighting package, Two speed
Hydro trans with Power Axle locks.Pro-heat,
Hyd tank heater.Steel feed Roller wheels. Misc. tools
and parts. Machine total hrs. 5173. On New engine 740hrs.
$189,000
T26092006 Timbco 415 EX, Rolly Processor, One
Owner machine with 7000hrs. In Wisc., $185,000
M515091998 Timbco Team, must sell as a team.
1-Owner, 425C has a 750 Log Max Head,
new in 2003. Good Undercarriage, Wabatsu
heater on both machines.
820C Forwarder has newer tracks, spare tire,
lots of parts. In Canada, both machines total
$115,000 In Canadian funds.
P1-912071998 Timbco 425, 2003 Keto 800 Harvestor
Head. $150,000
P2-629071998 Timbco 425C. New 260 Cummins, Fire
Suppression, new Undercarriage. 2006
Log Max 7000. Mint condition.$160,000 Reduced!
A71110Timbco 420 with Rolly processor head, 9000hrs.
near new undercarriage, In Mich. Will consider
Log truck in trade. $110,000
S1016091998 Timbco 425 with Quadco 5600 Extreme.
4700hrs. and new crate engine at 4500hrs. Mass
USA. $86,500
LR-12071997 Timbco 415C with 1998 Fabtek 4-
Roller Head. John Deere powered, newer
Hyd. Pump. . $66,500
A626101997 Timbco re-man 6BT Cummins, newer
hydr. pump, Ponsse H-73 Head with new feed
rllers and computer system. Undercarriage at 50%.
In Wisc. $63,500
PD715101997 Timbco 415, 11000hrs. Sling Shot
Processor head. 5.9 Cummins, 50% under-
carriage, newer turn bearing on head. In Mich.
$62,500
L19102001 Ponsse Ergo, 73 Head, 12,500hrs.
Hydr. and Drive pumps have been rebuilt. New
Crane and Turn table bearing, 2-sets of chains.
In Wisc. $96,500 "Must go!"
E1-121071997 Ponsse HS16, located in Wisc. Working
every day. $52,900
B79102003 Timberjack 1270 D Harvester with 758 head.
Machine has approx. 8696 hrs. and is in good
working condition. In Minn. $125,000, Will consider
reasonable offers.
M722102001 timberjack 1270C with 762 head. New motor
and pump in 2007. Cummins 8.3 engine, new
wiring harness and encoders. Very nice machine.
In Mich. $66,000
S117092000 Timberjack 1270B, approx. 11000hrs.
746 Head, Steel feed rollers and rubber wheels,
no tracks, 700mm tires. In Wisc. $92,500 OBO.
P314091995 Timberjack 1270A serial #1010.
13134hrs. Have all maintance records.
Had 1270 b Boom tower installed . 5000
Log Max serial #1209 with steel wheels and
newer big drive motors, 7917hrs.
Tach not working. New engine injection
pump has less than 1000 hrs. ago. Chains,
tracks, and fire suppression all bells and
whistles for 1995. Is located in Idaho $75,000 OBO.
ST-518081992 Timberjack 990 with 10,000hrs. 4/10/06
put in New Perkins, engine model 1006.
1300hrs on new engine. Also new Webasto
Pre-heater. Rebuilt Hyd. Pumps with 1000hrs.
762B Head with rubber Drive wheels. 700
tires, New Eco Tracks. Nice clean machine.
$72,500
A82092000 model Valmet 921, 8800hrs. 965 Head,
tracks and chains. In Maine. $149,500
HK310101999 Valmet 911C Processor, 965 Head, approx
20in. Cap. Working daily fast and accurate, newer
computer and Hydr. pump, good tire. In Minn.
$54,000 OBO.
PD628102006 Valmet 415 EX Carrier with Valmet
360 harvester head, approx 6277hrs. Sisu
Diesel engine, starts and runs well, single
shift machine, HD D5 single Grouse Under
carriage. In Canada $140,000 US.
PD1710580 Cat 3900hrs, No head! We can find one
for you. This has been used as a loader on
landing. In Canada, $110,000 US funds.
M722101994 rottne Harvester with Rottne head, 6-cyl.
Ford engine. Lots of new parts, very nice
machine. $46,000
R6610
2004 Fabtek 153 model, 8900hrs. 4-Roller
Fabtek head. In Wisc. $115,000
H315102004 Fabtek 133, 4-roller Fabtek Head, rebuilt
John Deere engine. New pumps, Turn motor,
tracksand computer. This has been will maintained
machine. In Minn. $94,000
FT28092002 or 03? Fabtek 133,Long beam 6500hrs.
to 7500hrs. $5000 worth of extra spare parts.
All New Undercarriage. $146,500
D1-825072000 133 Fabtek, 4-roller 3rd Meaasuring
wheel, Dia measuring. Newer Hyd. pump
and Undercarriage. Pro-heat, 8900hrs.
Very clean. $124,900
W315102000 Fabtek 133, s/nf29467, 13,745hrs.
I Can control, Pro-heat, Cleanfix reversable
fan, 24in. Double Grouser tracks, 4-roller
Independent measuring wheel, Kawasaki pumps, this
machine has a new engine has 2500hrs. and pumps.
new Sprocket and rails. $85,000
SR1226082004 153 Fabtek 4-Roller Head, 7800hrs.
$162, 000.
P918091997 Linkbelt, 2800 TL Serial #617-6630
company mounted the factory rebuilt Log
Max 7000 ID# 1661. The hours on the carrier
6883.8. hour on Log Max 650. It has a new
computer installed on it, so the hour shows 0
Undercarrige is good. Pierce Booms. $107,500
H610101997 Linkbelt 2700 Quantum Tree Harvester.
Rebuilt Rolly II Head with top saw and new
Woodland computer recently. New Final drives
and 700mm pads, approx 13,000hrs. with manuals,
work ing daily. In Wisc. $59,500
R925092000 652G John Deere with 2000 Series
Fabtek head, wide 3rd wheel, Pro heat, AC.
3500hrs. on new engine and pump, Sure
grip handles. New Undercarriage in Spring
of 09, working daily. In Wisc. $87,000
CJ-725081998 John Deere 653E, 2000 SeriesFabtek
4-roller Head. 15900hours, Hi-speed Saw
Near new motor, hyd. pump and Swing motor.
Tracks need work. $71,400
ML228091995 John Deere 590 model, 16in. 4-roller
Fabtek, 1-owner, In Canada, $41,000
N1-1125071994 John Deere 490E, 4-roller Fabtek
14000hrs. Lots of extra parts. In Minn. $41,500 OBO.
M531101994 John Deere 290D, 2-Roller Fabtek
Head, 11000hrs. In Wisc. $33,500
U5610290 D John Deere 2-Roller Fabtek Head with
8000hrs. Ready to wrk in woods. In Wisc.
$37,500
B71010John Deere 290 D with 2-Roller Fabtec head.
9802 hrs. In wisc. $25,900
G-9808Franklin 3000 1994 model, 1100hrs. 4300
Hytec 2-Roller Processor 18in. cap. with
400hrs. 24.5x32 tires. Perfect machine
$53,500
Will consider trade for smaller Excavator.
C52102002 Kobelco 130 Processor, Fabtek factory
conversion, 20in. 4-Roller Head, 80% Under-
carriage, heat, air conditioning, 4-cyl. Cummins.
Clean machine, 5600hrs. In ILL. $74,500
H6091999 Hyundai 130LC-3, approx 3000hrs, 8ft
Lakewood Stroke Processor, Owner operator,
retiring, In Wisc. $69,000
C1-31407Hyundai 130LCM-3, 38in. Single Bar
Growser 9450 hrs. Lakewood Roller Stroke
Head. Clean, One owner, this will do the
Swamp you always wanted to do. $58,900
P1-13061998 Hyundai 130 LCM-3, 420 Lakewood
RS Processor. Approx. 7500 hrs. $55,000
B91809Hyundai 130 LC3 with Lakewood Roller
Stroke Processor, 1997 model. Also have
2-parts machines in Mich. total $34,500
B1-3071998 130 LCM Samsung with 1999, 1850
Roller Stroke Processor head, 4907 Hrs.
Pro-heat, 28" pads, 9' wide. Newer Hyd.
Pump, newer computer, Good Undercarriage
$79,500
W419101995 130 LC Samsung Processor with
Hytec Head, 4ft. Stroke, new hydraulic pump,
in 2009. New starter and new battery, heated
cab. 8750hrs. In good shape, includes extra
chains, extra bar, and various accessories.
In Mich. $26,500
B1-406John Deere 70D with Fortec 2-Roller Proc.
Head. $16,900
CR32509Franklin 170 Articulated Loader with 4ft. Storke
Head, 453 Detroit Diesel motor,less than 50hrs.
on rebuild, 28in tires.. $13,500.
CJ-7260896 Ford Versatile, 930 approx. 7000hrs.
T&R 2-roller Head. $37,500
J44101993 Ford Versatile 9030, 9000hrs. New A/C
and brakes, Processor and shear head. In
Wisc. $17,500
DS-51008(Not Actual Photo) 1991 Ford Versatile
2-Roller Processor Head. Bar Saw. $33,000
BA1117091986 Hahn 110 Self propelled Harvestor,
5-9 Cummins extra tires and chains. This
is a good working machine, Stroker only 26in dia.
In South Dakota. $28,50
PD423102002 762 C Harvesting Head, 5000hrs,
have computer available, Fob Edmundston
In Canada, $25,000
Click below for more
