Terex PT110F tracked mulcher

2014 model w/1704 hours, Perkins 111 HP. engine, 75% undercarriage, CIMAF mulching head, 1-owner, in Texas

No views yet



Prentice 210E loader on Mack

2007 loader w/8756 hours, heat and AC, Cummins engine, mounted on good Mack RB6 w/171250 miles, both are clean and tight, working in LA

No views yet



Bombadier w/National Crane

series 756 w/35 foot jib, Detroit engine, winch on front, in Wisconsin

No views yet



Cat D6D crawler tractor

1979 model w/unknown hours, very good undercarriage, powershift trans, runs and works well, just spent $14000 for repair at Cat dealer, in Minn.

19 total views, 1 today



John Deere 853 MH w/ Waratah 623 head

2015 model w/1200 hours, JD Tier 111 engine, 90% undercarriage, 36 inch triple grouser pads and extra set of new 28 inch single bar grouser […]

47 total views, 1 today

2015 Log Max Model LM7000C H-72116


Log Max 7000C

2015 model, new and never used, RT250 Rotobec rotater, newest Log Mate 500 control system, Sure Grip handles some warranty remaining, in Texas

76 total views, 1 today



Tigercat 630E w/grapple and winch

2014 model w/2650 hours, 30.5 tires are 70% in Michigan

65 total views, 0 today



Tigercat 620E w/grapple and winch

2015 model w/2860 hours, 30.5 tires at 70% in Michigan

68 total views, 1 today



Ponsse Elephant

2011 model w/19000 hours, this has just been refurbished by dealer and is in very good condition w/tracks all around and hood guard, tires and […]

97 total views, 0 today



Cat 966G w/log forks and top clamp

2003 model w/19500 hours, this is working every day in AR.

77 total views, 2 today



Valmet 646 forwarder

1998 model w/newer engine, good tight loader w/rebuilt valve bank, 600 mm tires w/1-set of tracks, in Wisconsin

156 total views, 3 today



Tigercat 250D loader/slasher and delimber

2015 model w/2500 hours on heavy duty trailer w/hyd. landing gear, includes CSI Ultra delimber and CSI 4400 slasher w/36 foot foldable deck, in LA. […]

76 total views, 1 today



Hydro Ax 311B

this is good working machine w/John Deere engine and Timbco bar saw, includes chains and spare tire, in Michigan

167 total views, 1 today



Cat 307 w/Upton processor

1998 model w/ 15000 hours, 4D32 Mitsibishi engine and newer hyd. pump, newer undercarriage, this has 16 inch head w/measuring on feed rollers and center […]

181 total views, 2 today

HD 5


Allis Chalmers HD5 crawler loader

s/n  6944, this has good undercarriage, not running yet, just got it delivered to Antigo area 54409 this can be a project or parts and […]

123 total views, 1 today

HD 5 005


Cletrac model 15

this appears to be complete and have good undercarriage, s/n 1058, it has been stored inside for last 10 years, appears to be tight now […]

149 total views, 1 today



Peterbuilt 357 w/Hood 7000 loader

titled as 1992 because of different cab, truck is actually 1996, N14 mechanical Cummins, 18 speed trans, 44 rears w/full lockers, air ride, quad axle, […]

143 total views, 0 today



Valmet 544X forwarder

1995 model w/18300 hours, manual trans. and lever loader controls, AC and heat, 23.1X26 tires @60% this is in Wisconsin and will be a good […]

188 total views, 1 today



Ponsse Buffalo

2009 model w/approx. 12500 hours, this is a 1-owner and 1-operator machine, they bought another machine and did not trade, it has been well maintained […]

126 total views, 0 today



4-sided planer

i could find no name or s/n on this, it has been up-dated to run w/PTO, Babbitt bearings are tight and owner says this will […]

133 total views, 0 today

Case 1150


Case 1150 crawler tractor

this can be  a project or parts, has very good undercarriage, but has bad gear in transmission, has not run in several years and owner […]

103 total views, 1 today

Pasquali tractor


Pasquali tractor

this is 4 wheel drive, articulated and has 3-point hitch, diesel engine, this can be parts or project, water got in clutch housing and the […]

217 total views, 1 today

TJ 610


Timberjack 610

1997 model, hour meter not working, this has been working in wood yard for last 11 years and just replaced with newer machine, has new […]

252 total views, 1 today



Timber Pro 725B w/Rolly 11

2014 model w/3145 hours, in Wisconsin

146 total views, 0 today

Cat 501 O-62116


Cat 501 w/4 roller head

2012 model w/7050 hours, stump spray system, bar grease system, very good condition, in Wisconsin

129 total views, 0 today

CAT 501 O-62016


Cat 501 w/4-roller head

2011 model w/8000 hours, in Wisconsin, more details soon

118 total views, 0 today

Valmet 840.2  O-62016


Valmet 840.2

2003 model w/16000 hours, tracks included, tight and dry machine, in Wisconsin

129 total views, 1 today

TimberPro 620E O-62016


TimberPro 620E

2003 model w/3000 hours, has feller buncher boom w/out head, we can help find what you need, like new tires, in Wisconsin

126 total views, 2 today

crane truck A-62016


International 7500 w/National HT530 crane

2003 model w/88872 miles, Eaton trans, and 7.3 IH diesel engine, crane is N100-38-45 w/remote hand controls, in Wisconsin

111 total views, 0 today

1967 Bombardier A-62016



1967 model w/1769 hours, gas engine, runs and works well, in Wisconsin

109 total views, 0 today



Sterling Acterra Bucket/Boom Hi-Ranger STC-55

2007 model w/62718 miles and 8524 hours, 250 Hp. 6.4 liter Mercedes diesel, auto trans, in Wisconsin

92 total views, 0 today

IH a 61716


International 4700 w/Terex Telelect 4000 Commander4045 digger derick

1999 model w/64928 miles and 11729 hours showing, hyd. brakes, IH 7.6 liter diesel engine and manual trans, in Wisconsin

99 total views, 0 today

trk a-61716


Freightliner FL70 w/IMT 16/117 loader

2001 model w/160000 miles and 7418 hours showing, Cat 3126B 7.2 liter engine and manual trans, all new tires, in Wisconsin

99 total views, 0 today



Gulfstream Tour Master

1999 model w/ 6890 miles, this has been stored mostly, owner paid $525000 for this and spent another $15000 for motorcycle lift on rear, has […]

116 total views, 0 today

Cat 61516


Cat D9T chip dozer

2008 model w/39100 hours, new trans @20K, new undercarriage @32K and new engine @34K, fire suppression and rear camera, no rear hyds. no leaks, runs […]

115 total views, 1 today



Tree Farmer 3005 w/Rotosaw

1995 model w/4700 hours, 4 cyl. Cummins, 80% tires, 18 inch saw head, runs and works well, in Wisconsin

425 total views, 5 today

5-6-16 Kawasaki D2-5616


Kawasaki 70Z111

1994 model w/8007 hours, 5.9 Cummins, good 20.5X25 tires, runs and works well, in Wisconsin

148 total views, 2 today



Bell T-120

1994 model w/unknown hours, meter not working, this has swing boom Bell directional felling head, Cummins 4-cyl. engine, 75% undercarriage, good working and hard to […]

261 total views, 0 today



Valmet/Komatsu 895

2014 model w/9500 hours, 20 ton cap. all updates have been done including hydro trans, new hyd. pumps, all oils and filters have been changed, […]

227 total views, 1 today

4-19-16 oliver


Oliver 1755

95 Hp, 3-speed, 18.4X34 tires, 3-point and dual hyds. runs and works good, oil pressure gets low when warm, in Wisconsin

302 total views, 2 today



Cat 545D

2015 model w/1800 hours, dual arch and winch, 35.5 tires @75% and dueling rings, well maintained by Cat dealer in LA

223 total views, 0 today



Rottne Rapid SMV 16 ton

2004 model 2/22000 hours, 8000 on new engine and pumps, in New Jersey, price reduced 7-21-16

259 total views, 1 today



Rottne Rapid 12 ton

2000 model w/16500 hours, 4 cyl. John Deere engine, working AC and heat, good clean and tight machine, in New Jersey, price reduced 7-21-16

283 total views, 2 today



John Deere 843L w/JD FD22 center post head

2015 model w/1350 hours, owner has been cut back on quota and no longer needs this, has dual 23.1X26 tires on front and 30.5 on […]

411 total views, 1 today

C-4816 Voac


Voac 4-section hyd. valves

i have 2- of these from Lakewood roller stroke processor, they were mounted on head and came from burnt machine, in lower Michigan, $500 each, […]

274 total views, 1 today



Prentice bucket

not sure of year or model, but will find out if interested, in NY

189 total views, 1 today

D-4916 TJ


Timberjack 460

1999 model w/approx.15000 hours, dual arch and winch, in NY

286 total views, 1 today



Log Max 750 w/compter, joysticks and wiring

1997 model? this is a working head from 415 Timbco, owner has up-graded to newer head, has everything needed to install on your machine, all […]

379 total views, 3 today

C-4716 IH


International Transtar 4300 and Liberty dump trailer

this is a good farm truck w/209842 miles, 350 Cummins and 13 speed, wet kit, would like to sell together but will separate, 1978 Liberty […]

271 total views, 0 today

C-4516 A-Car


Auto Car and Brown loader trailer

1982 model w/low miles on reman big cam 430 Hp Cummins  and 18 speed trans, 44 rears, also 1982 Brown 6-axle trailer w/2-lifts and Serco […]

373 total views, 1 today



Komatsu PC220LC w/Log Max 7000XT head

2010 model w/approx.10000 hours, this has top saw, new feed rollers and new measuring wheel, newer delimbing knives, in LA. this has been dealer inspected […]

403 total views, 2 today

4-1-16 016


L.A.Woods reel trailer

model 2RT72X48188, good solid trailer, NO title, approx. 5 foot wide and 13 foot long inside, near new 12X16.5 LT tires, 18800 GVWR and 1-6000 […]

227 total views, 0 today



Case 660 trencher

1998 model w/340 hours, runs and works like new, in Wisconsin

371 total views, 0 today



International 4700 dump

2001 model w/approx.71000 miles, 7.6 diesel and 6 speed manual trans, 14 foot dump w/fold down sides, in Wisconsin

240 total views, 0 today



Barko 240 w/Skidmore head

2014 model w/approx. 2900 hours, working in Wisconsin, price reduced 4-11-16

591 total views, 3 today

R-4416 trlr


Talbert 35 ton lowboy trailer

This is 1992 model w/outside drop frame, non ground bearing gooseneck, beavertail and wheel covers on rear, 24 foot well, 102 wide, near new tires, […]

352 total views, 1 today



TimberPro TL725B

2010 model w/4890 hours, 8.3 Cummins engine, 20 inch Quadco head w/360 degree tilt, 80% undercarriage and newer final drive, in Wisconsin

324 total views, 3 today



TimberPro 620E

new 260 Hp Cummins 8.3 engine, 12000 hours on machine, SP 761LF head and squirt boom, 1-set of tracks, in Wisconsin

473 total views, 1 today



Timbco 820E

2001 model w/12000 hours, 8.3 Cummins, fixed boom and 20 inch Quadco hot saw w/40 degree tilt, like new, 1-set of tracks, in Wisconsin

292 total views, 0 today



Fabtek 153

2005 model w/9000 hours, [THIS IS NOT ACTUAL PHOTO] it is clean  and straight w/new 3rd measuring wheel, new hyd. pump, new injectors, new fire […]

365 total views, 2 today

dump trailer A-31116


Ravens 28 foot aluminum dump trailer

this has steel floor and lift axle, in Wisconsin

356 total views, 1 today

Bombadier A-31116



we have 2-of these, both have V8 Ford gas engine, looks like 390? 4-speed trans, 1 is running and 1-will, 1-has dump box and winch […]

321 total views, 0 today

A-3816 trk,rgn


International 5600 w/Fontaine RGN

this is 2001 model w/376745 miles, C15 Cat, 18 speed trans, full lockers and wet kit, steerable lift axle, pintle hitch, like new tires, double […]

345 total views, 1 today

170 Fra.P-22916


Franklin 170XL pack a back forwarder

1976? good running 453 Detroit, lever loader control and manual trans. 23.1X26 tires, 2-are near new, bi-pass bucket, enclosed and heated cab, this is in […]

798 total views, 2 today

JCB A-21316


JCB 506C forklift

2001 model w/4500 hours in Wisconsin

321 total views, 0 today

service trk


Chev Kodiak 4500 4X4

2006 model w/approx. 200k, 4X4 Duramax 6.6 engine and auto trans, lots of storage and plenty of room to work inside in bad weather on […]

347 total views, 1 today



Barko 495ML w/CSI delimber

2011 model w/8300 hours, mounted on trailer, new Rexroth main hyd. pump, Rotobec bucket, 32 foot reach, Tier 111 Cummins engine,very clean and straight, dealer […]

364 total views, 0 today



John Deere 643K

2013 model w/4200 hours, 28L tires @50% includes extra saw head that needs bearings, in Texas

350 total views, 1 today

A-21216 log trk


International Paystar

2001 model w/268000 miles, C16 Cat @600 Hp, 18 speed trans, full lockers, 6-axle w/9 foot spread, new clutch and brakes, Serco 8500 loader w/new […]

441 total views, 0 today

Bombadier A-21216


Bombadier Go Track

1978 model w/Perkins diesel, fresh paint, runs and works, in Wisconsin

339 total views, 0 today



Cat 573-C w/SC-57 center post saw head

2014 model w/2090 hours, 30.5 tires @75% 3-year 5000 hour warranty remaining, 1-owner, tight and dry in AR,

380 total views, 2 today



TimberPro 830

2006 model w/8100 hours, tracks all around, 300 Hp Cummins, 8 foot squirt boom extension, 1-owner, in Ky,

546 total views, 1 today



Timbco 420 w/bar saw

very good undercarriage and 1-year old 5.9 Cummins engine, in Wisconsin

697 total views, 2 today

1995 Franklin 170 Grapple Skidder  004


Franklin 170 grapple and winch

1995 model, 1500 hours on reman 6BT Cummins, powershift trans, 28L tires @40%, Esco grapple, in Ohio

1086 total views, 1 today

TF2 B-12715


Tree Farmer C-6 grapple and winch

1000 hours on rebuilt Detroit engine, powershift trans, 23.1X26 tires, 1@25% and 3@50%, approx. 12700 hours, in Michigan

531 total views, 1 today



Valmet/Timbco 445FXL w/Quadco 2800 inter-mitten saw

2008 model w/300 Hp Cummins,  8100 hours, 60% undercarriage on 24 inch single bar grousers, 360 degree tilt on saw head, 1-owner and working in […]

451 total views, 1 today



Morbark 30X36 drum whole tree chipper

2008 model w/5500 hours, 500 Hp John Deere engine, remote control and auto feed system, 1-owner and well maintained in SC

346 total views, 0 today



TimberPro 630B w/33 inch bar saw head and 360 degree tilt

2006 model w/7100 hours, cold weather start, 60% tires, 1-owner, in Mo.

460 total views, 3 today



John Deere 759G w/hot saw

2005 model w/8010 hours, JD FS22B saw head w/40 degree tilt, 50% undercarriage on 24 inch pads, new rotary manifold [collector] cold weather start, just […]

396 total views, 1 today



FMC/Timberjack 990

1992 model w/8500 hours, this is tight and clean, [no head] but will help find one if needed, had Valmet 955 head when last used, […]

604 total views, 0 today

prentice 036


Prentice 2344

2007 model w/2700 hours, this was used little w/drilling rig, a good Fabtek loader w/squirt boom has been installed and is ready to work, new […]

879 total views, 1 today



Fabtek 133

2001 model w/12220 hours, new tier 1 engine and hyd. pump, undercarriage has been replaced w/153 UC, this is working daily in Wisconsin

621 total views, 2 today

Tigercat 1 M-1516


Tigercat 845B w/Log Max 7000B

2002 model w/10500 hours, clean and straight w/no leaks, 70% undercarriage, in New Jersey, will remove head if not needed and sell for $100000 price […]

867 total views, 2 today



Valmet 380 processor head

2007 model w/approx.5200 hours, set up for Timbco carrier, new saw bearings and sensor, new feed wheel accumulator, lots of spare parts, rebuilt valve bank, […]

673 total views, 1 today



Ponsse Buffalo King

2004 model w/23000 hours, has many new parts, center pin, hy stats, front diff, main hyd.pump, drop box, and radiator, comes w/1 set of tracks, […]

678 total views, 0 today

ac grader 2


Allis Chalmers D grader

this is a 1949 model that has been restored to near perfect show condition, gas engine, this has been replaced by newer machine and needs […]

631 total views, 1 today

grader, Bosch pump and slicer 010


Austin Western Super 500

this is 6-wheel drive, one of the best graders ever made, s/n 564 6816, V6 Detroit, manual trans. new 1300X24 tires, runs and works w/no […]

640 total views, 0 today

meat slicer 023


Globe Slicing Machine

this has 11 1/4 inch blade and sharpener from early 1900’s, runs and works, Delco 1/4 hp motor, 1740 RPM, machine s/n 54464 in Wisconsin

783 total views, 2 today

grader, Bosch pump and slicer 001


Bosch 908 fuel pump

this appears to be new and never used, i am not sure what it fits, maybe the numbers will help, 468/899 PES6P110A720RS3267       […]

926 total views, 4 today

548D JD


John Deere 548D grapple and winch

this is early 90’s model w/approx. 14000 hours, has new turbo charged engine and 2-new rear tires 1-year ago, this is a good and hard […]

781 total views, 2 today

timberjacj 1110B 001_resized_1


Timberjack 1110B

2000 model w/11200 hours, 5.9 Cummins engine, 1-year old by-pass bucket, 700.50 tires, squirt boom, Webatsu pre-heater, health is forcing sale, in Wisconsin

859 total views, 2 today



John Deere 335D log loader

2010 model w/5610 hours, includes little used pull through delimber, but not slasher, this is tight and dry, in Ind.

797 total views, 2 today



Peterson 4300B whole tree chipper

2014 model w/745 hours, Cat C18 765 Hp. engine, factory remaining warranty, 24 inch dia. capacity, radio remote control, 1-owner and in Texas

500 total views, 1 today



John Deere 648H Dual arch grapple and winch

2011 model w/7500 hours, 30.5X32 tires, 2-are new and 2=40% this is tight and dry, in Texas, price reduced 2-9-16

661 total views, 1 today



Timbco 445EXL w/Quadco hot saw

2005 model w/9500 hours, 22 inch head, 300 Hp. Cummins, 60% undercarriage, new aux. hyd. cooler, this is tight and dry in SD

497 total views, 2 today



Valmet 860.1

2005 model w/16900 hours, 1-st of tracks, 60% tires, newer Hy-Stats, in Tenn

627 total views, 6 today

Splitter3 (1)


Industrial Wood Splitter

this is a demo machine w/very little use, 4 cyl. Kubota 45 Hp engine, 2-stage Permico hyd. pump, approx. 16 gpm for splitter and 6 […]

608 total views, 1 today



Precision 23/66 whole tree disc chipper

2001 model w/Cat 3412, 750 Hp. Husky XL175 loader, 3-knife w/key knife system, external chute controls, 10500 hours, 1-owner and well maintained in Calif.

553 total views, 0 today



John Deere 648G111

2002 model w/11200 hours, dual arch and winch, new 30.5X32 tires, runs and works well, tight and dry in Texas

549 total views, 0 today



Fabtec 546C

2004 model w/17900 hours and working daily, 30.5 and 650 tires, in Ky

751 total views, 0 today

Welcome to Richard's Machinery Sales

We've Got What You're Looking For! or will help you find it, email or call, since 1976 I have been in service, transportation and sales, no contracts, no hassle, I screen all calls and send you the serious buyers.

Richard’s Machinery & Sales

Semi Truck and Trailer, Farm and Construction Machine Repair!